weber.rend

TTC

weber.rend TTC

weber.rend TTC is a cement based mortar render for use as a second or top coat. It can be float finished to take synthetic finishes or dry dashing using decorative aggregates.

  • Pre-blended : Requires only the addition of clean water on-site.

  • Through coloured - requires minimal maintenance and no subsequent painting. Available in both grey and coloured forms.

  • Available in 11 different colours.

  • Established track record in varying climatic conditions.

  • Conforms to BS 5262.

Coverage: To receive dry-dash nominal thickness - 10kg / m squared

weber.rend

TTS

weber.rend TTS

weber.rend TTS is a factory batched, through coloured top coat mortar most suited to scraped texture. weber.rend TTS can be used in weber render protected external wall insulation systems and multi coat systems.

  • Pre-blended : Requires only the addition of clean water on-site.

  • Through coloured - requires minimal maintenance and no subsequent painting.

  • Available in a range of 10 pastel colours.

  • Established track record in varying climatic conditions.

Coverage: Scraped 6mm nominal thickness 16kg / m squared

cullamix

tyrolean

cullamix tryolean

cullamix tyrolean is a white or coloured cement based mix, which provides a decorative and protective render. It is applied by hand or power operated machines and provides an open honeycomb textured (tyrolean) finish.

  • Pre-blended : Requires only the addition of clean water on-site.

  • Durable & weather resistant.

  • Through coloured - requires minimal maintenance and no subsequent painting.

  • Suitable for most environments: coastal, suburban and rural.

Coverage: Applied at 4-6mm, approx 5 m squared / 25kg bag

Packaging

Packaging

weber.rend TTC is packaged in 3-ply 25kg bags with batch code, description and colour on the side.

weber.pral

D

weber.pral D

One-coat, through coloured monocouche render

  • Through coloured external render.

  • For application to most suitably prepared brick and blockwork.

weber.pral D is specifically formulated with the demands of the house builder. weber.pral D is supplied in 25kg paper sacks.

To achieve a finished thickness of 15 mm, coverage is approximately 1 m squared per 25kg bag

Features and benefits

  • One coat for fast application and short programme periods.

  • Through-coloured for low maintenance – decoration not required.

  • A+ Green Guide Rating.

  • Factory produced for consistency of proportioning.

  • Ready mixed – only water required to be added on site for ease of use NSAI approved certificate no. 03/0180

Colours

  • weber.pral D is available is a range of 24 colours.

  • Specifiers should consult the weber.pral D Colour Chart whenever possible.

triplestrength

medusa

triplestrength medusa

About the product

triple strength medusa is an admixture in white powder form. Its addition to a concrete or mortar mix will improve the water repellence of the finished work

Uses

To provide economical and durable renderings and mortars with increased water repellence.

To reduce surface water absorption and hence staining of rendering, insitu concrete and precast concrete

Constraints

triple strength medusa is not suitable for use with high alumina or calcium aluminate cements.

Features and benefits

  • Provides increased water repellence.

  • Assists in providing even suction in undercoats.

  • Reduces water permeability.

  • Reduces the risk of surface crazing of in-situ and precast concrete.

  • Reduces surface water absorption.



Note: Estimates take no account of wastage and will vary according to the type of surface involved and method of application.